How To Control Soundbar With Tv Remote

Setting up your Television's audio output will permit you to command the soundbar's book using your remote. In one case the output is gear up, you can and so cull to connect either a digital optical cablevision or an HDMI cable to the soundbar. Later you do that, you'll be able to utilize one remote for both your Tv set and soundbar.

Apply the Telly remote to navigate to Settings, select Sound, and so select Sound Output on your Samsung TV.
Select your Samsung soundbar, and and so select Close. Now yous can utilise your Telly remote to adjust volume and mute the soundbar. The soundbar should likewise plough on and off with the Telly.

Sound Output with [AV] Soundbar NW700 (Wi-Fi) selected

By default, Samsung Television remotes should be able to control Samsung soundbars. If it isn't working, exist sure the soundbar is powered on, and so press and hold the WOOFER push button upward until "ON - TV REMOTE" appears on the display (most 5 seconds). Side by side, y'all'll need to cull between connecting with an optical cable or an HDMI cable.

Annotation: If your remote does not take the WOOFER button, check your user transmission for how to turn on the TV Remote office.

If you decided to use a digital optical cable, actuate the Automobile Power Link feature which will automatically turn the soundbar on or off with your TV.

Connect a digital optical cable from your soundbar'southward optical port to your Tv's optical port. Make sure to remove the plastic protector caps before using the optical cable.
Set the soundbar to D.IN way by pressing Source on the remote or soundbar.
Press and agree the left direction on the directional pad on the remote to activate or conciliate Auto Ability Link.

The soundbar will turn on and off when the TV is turned on and off. Brand certain you lot also set the sound output on the TV.

Note: Auto Ability Link merely works with an optical connection and is turned on by default.

If y'all decided to utilize an HDMI cablevision, activate the Anynet+ feature which automatically turns the soundbar on or off with your Boob tube.

Connect an HDMI cablevision from the HDMI OUT port on your soundbar to your Boob tube's HDMI (ARC) port.
Set the soundbar to D.IN mode by pressing Source on the remote or soundbar. Subsequently most two seconds, the source will automatically modify to Television set ARC.

The soundbar will turn on and off when the TV is turned on and off. Brand sure you also set the audio output on the TV.